FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 149)

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings 149
5.1.9 ether SNMP Information
This section explains about the commands related to ether SNMP Information.
5.1.9.1 ether snmp trap linkdown
Function Enable/disable a linkdown trap for a specified ether port.
Available Model XG0224 / XG0448 / XG2600
Syntax ether snmp trap linkdown
Options
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
Enable or disable linkdown trapping for the specified port(s).
• enable
Enable trapping.
• disable
Disable trapping.
Use Mode Configuration mode (admin class)
Explanation Enable or disable the linkdown trap for the specified ether port(s).
Caution The "snmp trap linkdown" command has a priority over this command.
Default It is assumed that the linkdown trap is enabled for all ports.
ether snmp trap linkdown enable