H3C Technologies H3C SecPath F1000-E - Manual (Page 458)

446
Step Command Remarks
3. Specify the primary VAM
server. server primary ip-address
ip-address [ port port-number ]
Not specified by default
Specifying the secondary VAM server
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VAM client view. vam client name client-name N/A
3. Specify the secondary VAM
server.
server secondary ip-address
ip-address [ port port-number]
Not specified by default
Configuring the username and password
A client needs a username and a password to be authenticated by the server. You can configure the
username and password for a client by creating a local user.
To configure a username and password for a VAM client:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VAM client view. vam client name client-name N/A
3. Configure a username and
password for the client. user username password { cipher |
simple } string
Not configured by default
NOTE:
Only one local user can be configured for a VAM client.
Specifying the VPN domain of the VAM client
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VAM client view. vam client name client-name N/A
3. Specify the VPN domain of
the VAM client.
vpn vpn-name
A VAM client does not belong to
any VPN domain by default.
Specifying the pre-shared key of the VAM client
The pre-shared key is used to generate the keys for security of the channels between the server and a
client.
To specify the pre-shared key of the VAM client:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VAM client view. vam client name client-name N/A