beautypg.com

Figure 157, Table 25 – H3C Technologies H3C SecPath F1000-E User Manual

Page 259

background image

247

Item Description

Backup

Specify whether to enable the backup authorization method.

Accounting

Methods

Accounting Optional

Specify whether to enable the accounting optional function.
For an online user, with the accounting optional function
disabled, if no accounting server is available or communication

with the current accounting server fails, the user will be
disconnected. However, with the accounting optional function

enabled, the user can still use the network resources in such

case, but the system will not send the accounting information of
the user to the accounting server any more.

Primary

Server Type

Select the accounting server type for PPP users:

HWTACACS—Uses HWTACACS accounting.

Local—Uses local accounting.

None—The system does not perform accounting for the

users.

RADIUS—Uses RADIUS accounting.

If you do not select any accounting method, the default

accounting method of the ISP domain will be used, which is

Local by default.

Scheme

Scheme for the primary accounting method, which is displayed
when you select HWTACACS or RADIUS as the server type. The

scheme is always system.

Backup

Specify whether to enable the backup accounting method.

Max. Number of Users

Specify the maximum number of users the ISP domain can
accommodate. If you do not specify the maximum number, the

system will not limit the number of users of the ISP domain.
As users may compete for resources, setting a proper limit on the
number of users of an ISP domain helps guarantee performance

for the users of the ISP domain.

Figure 157 Adding an address pool

Table 25 Configuration items

Item Description

ISP Domain

Select the ISP domain for the IP address pool to be created.

IP Address Pool Number

Specify the number of the IP address pool.
If you set the IP address pool number to 1, the name of the IP address pool is pool1.