H3C Technologies H3C SecPath F1000-E - Manual (Page 366)

354
Figure 232 Add an available network service
Table 41 Configuration items
Item Description
Destination IP Enter the destination address of the network service.
Subnet Mask Enter the subnet mask of the network service.
Protocol Specify the protocol type of the network service, which can be IP, TCP, or UDP.
Description
Enter a description for the network service.
IMPORTANT:
If you have configured the system to show network services by description, H3C
recommends that you include the network services’ network information (subnet IP/mask)
in the description so that users can view desired information after they log in to the SSL
VPN system.
2. To configure a shortcut:
On the page shown in
Figure 231 , click the Add button under the shortcuts list to enter the page
for adding a network service shortcut, as shown in Figure 233 .
Figure 233 Add a network service shortcut
Table 42 Configuration items
Item Description
Shortcut Name Enter a name for the shortcut.
Command Specify the Windows command of the shortcut.