H3C Technologies H3C SecPath F1000-E - Manual (Page 368)

356
Figure 236 Predefined domain names
Figure 237 Adding a predefined domain name
Table 44 Configuration items
Item Description
Domain Name Enter a domain name to be issued to clients.
IP Setting Method
Select the IP setting method, including Dynamic and Static.
• Dynamic—To use this method, you also need to navigate to page Network
Management > DNS to configure domain name resolution. The gateway will first
resolve the domain name to get an IP address and then issue the IP address to
clients.
• Static—To use this method, you must specify an IP address in the next field. The
gateway will issue the domain name-IP address mapping to clients.
IP
Specify an IP address for the domain name when the IP setting method is Static.
When the IP setting method is Dynamic, this IP setting does not take effect.
Configuring a resource group
Select VPN > SSL VPN > Resource Management > Resource Group from the navigation tree. The
Resource Group page appears, listing all existing resource groups, as shown in Figure 238 . Click Add
to enter the page for adding a resource group, as shown in Figure 239 .