H3C Technologies H3C SecPath F1000-E - Manual (Page 131)

119
IPv6 is enabled, link-local address is FE80::2024:1
Global unicast address(es):
3001::1:2, subnet is 3001::/64
Joined group address(es):
FF02::1:FF24:1
FF02::1:FF01:2
FF02::1:FF00:0
FF02::2
FF02::1
MTU is 1460 bytes
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
...
# Ping the IPv6 address of the peer interface GigabitEthernet 0/1 from Router A.
[RouterA] ping ipv6 2002:3::1
PING 2002:3::1 : 56 data bytes, press CTRL_C to break
Reply from 2002:3::1
bytes=56 Sequence=1 hop limit=64 time = 31 ms
Reply from 2002:3::1
bytes=56 Sequence=2 hop limit=64 time = 1 ms
Reply from 2002:3::1
bytes=56 Sequence=3 hop limit=64 time = 16 ms
Reply from 2002:3::1
bytes=56 Sequence=4 hop limit=64 time = 16 ms
Reply from 2002:3::1
bytes=56 Sequence=5 hop limit=64 time = 31 ms
--- 2002:3::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/19/31 ms
Displaying and maintaining tunneling configuration
Task Command Remarks
Display information
about tunnel
interfaces.
display interface [ tunnel ] [ brief [ down ] ] [ | { begin |
exclude | include } regular-expression ]
display interface tunnel number [ brief ] [ | { begin | exclude
| include } regular-expression ]
Available in any view
Display IPv6
information on tunnel
interfaces.
display ipv6 interface tunnel [ number ] [ brief ] [ | { begin |
exclude | include } regular-expression ]
Available in any view