H3C Technologies H3C SecPath F1000-E - Manual (Page 178)

166
Figure 113 IPsec policy template configuration page
Table 12 Configuration items
Item Description
Template Name Enter a name for the IPsec policy template.
Sequence Number
Enter a sequence number for the IPsec policy template.
In an IPsec policy template group, an IPsec policy template with a smaller
sequence number has a higher priority.
IKE Peer
Select an IKE peer for the IPsec policy template.
You configure IKE peers by selecting VPN > IKE > Peer from the navigation tree.
IPSec Proposal
Select up to six IPsec proposals for the IPsec policy template.
IPsec SAs can be set up only when the IPsec peers have at least one matching IPsec
proposal. If no matching IPsec proposal is available, the IPsec SAs cannot be
established and the packets that need to be protected are discarded.