H3C Technologies H3C SecPath F1000-E - Manual (Page 140)

128
2. Click Add.
Figure 86 Adding an IKE DPD detector
3. Configure an IKE DPD as described in Table 7 .
4. Click Apply.
Table 7 Configuration items
Item Description
DPD Name Enter a name for the IKE DPD.
DPD Query Triggering Interval
Enter the interval after which DPD is triggered if no IPsec protected
packets is received from the peer.
DPD Packet Retransmission Interval
Enter the interval after which DPD packet retransmission will occur if no
DPD response is received.
Configuring an IKE peer
1. Select VPN > IKE > Peer from the navigation tree.
Figure 87 IKE peer list