H3C Technologies H3C SecPath F1000-E - Manual (Page 363)

351
Task Remarks
Configuring host resources
Required.
Configure the host resources that users can access from the IP networks list of the
SSL VPN interface.
Configuring a user-IP
binding
Optional.
Configure user-IP bindings. After a user is bound with an IP address, when the
user accesses IP network resource, the system does not assign a virtual network
adapter IP address to the user from the global IP pool but assigns the bound IP
address to the user.
Configuring a predefined
domain name
Optional.
With a predefined domain name configured, the gateway sends the mapping
between the predefined domain name and the IP address to clients. When
accessing this domain, a client directly uses the corresponding IP address,
eliminating the requirement for DNS resolution.
Configuring global parameters
Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree. The Global
Configuration tab appears, as shown in Figure 229 .
Figure 229 Global configuration page
Table 39 Configuration items
Item Description
Start IP
Specify the IP address pool from which the gateway assigns IP addresses for clients’
virtual network adapters.
End IP
Subnet Mask Enter the subnet mask to be assigned to a client’s virtual network adapter.
Gateway IP
Enter the default gateway IP address to be assigned to a client’s virtual network
adapter.
Timeout
Set an idle timeout for client connections. If the gateway does not receive any packet
from a client during this period, the gateway disconnects the client.
WINS Server IP Enter the WINS server IP addresses to be assigned to a client’s virtual network adapter.