H3C Technologies H3C SecPath F1000-E - Manual (Page 21)

9
Verifying the configuration
# Log in to the web interface of Device A and then select Device Management > Interface from the
navigation tree. Click the name link of Tunnel0. You can view the status of interface Tunnel0, as
shown in
Figure 13 .
Figure 13 Status information and statistics of interface Tunnel0
# From Device B, ping the IP address of GigabitEthernet 0/0 on Device A.
ping 10.1.1.1
PING 10.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 10.1.1.1: bytes=56 Sequence=1 ttl=255 time=2 ms
Reply from 10.1.1.1: bytes=56 Sequence=2 ttl=255 time=2 ms
Reply from 10.1.1.1: bytes=56 Sequence=3 ttl=255 time=2 ms
Reply from 10.1.1.1: bytes=56 Sequence=4 ttl=255 time=2 ms
Reply from 10.1.1.1: bytes=56 Sequence=5 ttl=255 time=2 ms
--- 10.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms