H3C Technologies H3C SecPath F1000-E User Manual
Page 405
393
Figure 284 Adding local user usera
c.
Enter the username usera.
d.
Enter the password passworda.
e.
Confirm the password.
f.
Select the box before Enable public account.
g.
Set the maximum number of users for the public account to 1.
h.
Select Permitted as the user status.
i.
Click Apply.
2.
Configure user groups:
# Configure user group user_gr1, assign resource group res_gr1 to the user group and add local
user usera to the user group.
a.
Select VPN > SSL VPN > User Management > User Group from the navigation tree.
b.
Click Add to perform the following configurations.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS