H3C Technologies H3C SecPath F1000-E - Manual (Page 254)

242
Table 22 Configuration item
Item Description
Enable L2TP Specify whether to enable L2TP globally.
Adding an L2TP group
Select VPN > L2TP > L2TP Config from the navigation tree to enter the L2TP configuration page, as shown
in Figure 154 . On the lower part of the page, you can view and configure L2TP groups. Click Add to add
an L2TP group, as shown in Figure 155 .
Figure 155 Adding an L2TP group
Table 23 Configuration items
Item Description
L2TP Group Name Specify the name of the L2TP group.
Peer Tunnel Name Specify the peer name of the tunnel.
Local Tunnel Name Specify the local name of the tunnel.