H3C Technologies H3C SecPath F1000-E - Manual (Page 367)

355
Configuring a user-IP binding
Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree. Click the User-IP
Binding tab to view existing user-IP bindings, as shown in Figure 234 . Click Add to enter the page for
adding a user-IP binding, as shown in Figure 235 .
Figure 234 User-IP bindings
Figure 235 Adding a user-IP binding
Table 43 Configuration items
Item Description
Username
Specify the username to be bound with an IP address. The username must contain the
domain name. For example, aaa@local.
IP Address
Specify the IP address to be bound with the username.
The specified IP address must be in the same network segment as the global IP address
pool and must not be the gateway address or any address in the global IP pool.
Configuring a predefined domain name
Select VPN > SSL VPN > Resource Management > IP Network from the navigation tree. Click the
Predefined Domain Name tab to view existing predefined domain names, as shown in Figure 236 . Click
Add to enter the page for adding a predefined domain name, as shown in Figure 237 .