Rockwell Automation 193-EC1_2_3_5, 193-ECPM,592-EC1_2_3_5 E3 and E3 Plus Solid-State Overload Relay User Manual - Manual (Page 26)

26 Rockwell Automation Publication 193-UM002I-EN-P - December 2011
Chapter 2 Installation & Wiring
Voltage Input Module
The voltage input module, Cat. No. 193-NVEC5VIM, is an add-on accessory for
use with the E3 Plus. Approximate dimensions are shown in millimeters (inches).
Dimensions are not intended to be used for manufacturing purposes.
Figure 12 - 193-NVEC5VIM Voltage Input Module
Specifications Power Terminals
Table 2 - Wire Size & Torque Specification
L1
L3
L2
0.886
(22.5)
2.972
(75.5)
2.782
(70.65)
0.457
(11.6)
3.216
(82.0)
Ø 0.177
(4.5)
Cat. No.
Wire Type Conductor Torque
193-EC_ _B & D,
592-EC_ _T, C 193-EC_ _E,
592-EC_ _D
Stranded/Solid [AWG] Single #14…6 AWG
22 lb-in. #12…1 AWG
35 lb-in.
Multiple #10…6 AWG
30 lb-in. #6…2 AWG
35 lb-in.
Flexible-Stranded with Ferrule Metric Single 2.5…16 mm 2
2.5 Nm
4…35 mm 2
4 Nm
Multiple 6…10 mm 2
3.4 Nm
4…25 mm 2
4 Nm
Coarse-Stranded/Solid Metric Single 2.5…25 mm 2
2.5 Nm
4…50 mm 2
4 Nm
Multiple 6…16 mm 2
3.4 Nm
4…35 mm 2
4 Nm