Rockwell Automation 193-EC1_2_3_5, 193-ECPM,592-EC1_2_3_5 E3 and E3 Plus Solid-State Overload Relay User Manual - Manual (Page 233)

Rockwell Automation Publication 193-UM002I-EN-P - December 2011 233
DeviceNet™ Information Appendix B
Table 73 - DeviceNet Object Classes
Identity Object – Class
Code 0x01
The following class attributes are supported for the Identity Object.
Table 74 - Identity Object Class Attributes
Two instances of the Identity Object will be supported. The following table
shows what each instance will represent and what the revision attribute will
report.
Table 75 - Revision Attribute Display
Instance 1 of the Identity Object will contain the following attributes.
Class Object
0x0001 Identity
0x0002 Message Router
0x0003 DeviceNet
0x0004 Assembly
0x0005 Connection
0x0008 Discrete Input Point
0x0009 Discrete Output Point
0x000F Parameter Object
0x0010 Parameter Group Object
0x001E Discrete Output Group
0x0029 Control Supervisor
0x002B Acknowledge Handler
0x002C Overload Object
0x0097 DPI Fault Object
0x0098 DPI Warning Object
0x00B4 DN Interface Object
0x00C2 MCC Object
0x030E Logic Supervisor
0x0375 E3 Status Object
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1
Instance Description Revision Attribute
1 Operating System Flash The firmware revision of the OS stored in flash memory
2 Boot Code Flash The firmware revision of the boot code stored in flash memory