Rockwell Automation 193-EC1_2_3_5, 193-ECPM,592-EC1_2_3_5 E3 and E3 Plus Solid-State Overload Relay User Manual - Manual (Page 162)

162 Rockwell Automation Publication 193-UM002I-EN-P - December 2011
Chapter 8 Power Parameters
Total Real Power
This parameter provides the total real
power (kW) measured in all phases with
measurement in kiloWatts.
Parameter Number 176
Access Rule Get
Data Type INT
Object Mapping 0Fhex-B0-01
Group Power Monitor
Units kW
Minimum Value -32768
Maximum Value 32767
Default Value —
L1 Reactive Pwr
This parameter provides the reactive
power (kVAR) measured in L1 with
measurement in kiloVolt-Amperes
reactive.
Parameter Number 177
Access Rule Get
Data Type INT
Object Mapping 0Fhex-B1-01
Group Power Monitor
Units kW
Minimum Value -32768
Maximum Value 32767
Default Value —
L2 Reactive Pwr
This parameter provides the reactive
power (kVAR) measured in L2 with
measurement in kiloVolt-Amperes
reactive.
Parameter Number 178
Access Rule Get
Data Type INT
Object Mapping 0Fhex-B2-01
Group Power Monitor
Units kVAR
Minimum Value -32768
Maximum Value 32767
Default Value —
L3 Reactive Pwr
This parameter provides the reactive
power (kVAR) measured in L3 with
measurement in kiloVolt-Amperes
reactive.
Parameter Number 179
Access Rule Get
Data Type INT
Object Mapping 0Fhex-B3-01
Group Power Monitor
Units kVAR
Minimum Value -32768
Maximum Value 32767
Default Value —
Tot Reactive Pwr
This parameter provides the total
reactive power (kVAR) measured in all
phases with measurement in
kiloVolt-Amperes reactive.
Parameter Number 180
Access Rule Get
Data Type INT
Object Mapping 0Fhex-B4-01
Group Power Monitor
Units kVAR
Minimum Value -32768
Maximum Value 32767
Default Value —