Rockwell Automation 193-EC1_2_3_5, 193-ECPM,592-EC1_2_3_5 E3 and E3 Plus Solid-State Overload Relay User Manual - Manual (Page 123)

Rockwell Automation Publication 193-UM002I-EN-P - December 2011 123
Programmable Parameters Chapter 5
Reset/Lock Group
Table 59 - Reset Power Parameters Detail — E3 Plus Model EC5
RESET kWh
This parameter allows the installer to reset
the kWh accumulator to zero.
Parameter Number 293
Access Rule Get/Set
Data Type BOOL
Object Mapping 0Fhex-125-01
Group Reset/Lock
Units —
Minimum Value 0 = No Action
Maximum Value 1 = Reset
Default Value 0
RESET kVARh
This parameter allows the installer to reset
the kVARh accumulator to zero.
Parameter Number 294
Access Rule Get/Set
Data Type BOOL
Object Mapping 0Fhex-126-01
Group Reset/Lock
Units —
Minimum Value 0 = No Action
Maximum Value 1 = Reset
Default Value 0
RESET kVAh
This parameter allows the installer to reset
the kVAh accumulator to zero.
Parameter Number 295
Access Rule Get/Set
Data Type BOOL
Object Mapping 0Fhex-127-01
Group Reset/Lock
Units —
Minimum Value 0 = No Action
Maximum Value 1 = Reset
Default Value 0
RESET MAX kW DMND
This parameter allows the installer to reset
the maximum kW Demand parameter to
zero.
Parameter Number 296
Access Rule Get/Set
Data Type BOOL
Object Mapping 0Fhex-128-01
Group Reset/Lock
Units —
Minimum Value 0 = No Action
Maximum Value 1 = Reset
Default Value 0
RESET MAX kVAR DMND
This parameter allows the installer to reset
the maximum kVAR Demand parameter to
zero.
Parameter Number 297
Access Rule Get/Set
Data Type BOOL
Object Mapping 0Fhex-129-01
Group Reset/Lock
Units —
Minimum Value 0 = No Action
Maximum Value 1 = Reset
Default Value 0