Control supervisor object – class code 0x29 – Rockwell Automation 193-EC1_2_3_5, 193-ECPM,592-EC1_2_3_5 E3 and E3 Plus Solid-State Overload Relay User Manual User Manual
Page 247
Rockwell Automation Publication 193-UM002I-EN-P - December 2011
247
DeviceNet™ Information Appendix B
Control Supervisor Object
– Class Code 0x29
The following instance attributes are supported for the Control Supervisor
Object.
Service
Code
Implemented for:
Service
Name
Class
Instance
0x0E
No
Yes
Get_Attribute_Single
0x10
No
Yes
Set_Attribute_Single
Table 115 - Control Supervisor Object Instance Attributes
Attribute
ID
Access
Rule
Name
Data
Type
Value
10
Get
Tripped
BOOL
0 = No Fault present
1 = Fault Latched
11
Get
Warning
BOOL
0 = No Warning present
1 = Warning present (not latched)
12
Get/Set
Fault Reset
BOOL
0->1 = Trip Reset
otherwise no action
13
Get
Trip Code
UINT
ODVA Trip Code – In trip state
indicates cause of trip; If not tripped,
indicates cause of last trip.
14
Get
Warning Code
UINT
ODVA Warning Code - In warning
state indicates cause of warning; If no
warning, indicates cause of last
warning.
17
Get/Set
Force Trip
BOOL
0->1 = Trip. Test trip generated. This
attribute returns object state conflict
when “Test Enable” bitr is set in Trip
Enable.
100
Get
Elapsed Time
UINT
Logs motor-on (Current Present)
hours.
101
Get
Starts Counter
UINT
Logs the number of motor starts.
102
Get
Starts Available
USINT
Starts left for the programmed start
interval
103
Get
Time To Start
UINT
Time before the next start can be
preformed (in seconds)
104
Get/Set
Starts per Hour
USINT
Number of starts allowed per hour.
105
Get/Set
Starts Interval
UINT
Minimum time between starts,
106
Get/Set
PM – Start Count
UINT
The Preventative Maintenance Start
Count flag is set after this number of
starts
107
Get/Set
PM – Oper Hours
UINT
The Preventative Maintenance
Operating Hours flag is set after this
number of hours
108
Get/Set
Test Enable
BOOL
Enables/Disables the Test Button.
109
Get
Warning Log 0
WORD
Enumerated same as attribute 115
110
Get
Warning Log 1
WORD
Enumerated same as attribute 115
111
Get
Warning Log 2
WORD
Enumerated same as attribute 115
112
Get
Warning Log 3
WORD
Enumerated same as attribute 115
113
Get
Warning Log 4
WORD
Enumerated same as attribute 115