Rockwell Automation 193-EC1_2_3_5, 193-ECPM,592-EC1_2_3_5 E3 and E3 Plus Solid-State Overload Relay User Manual - Manual (Page 187)

Rockwell Automation Publication 193-UM002I-EN-P - December 2011 187
Trip History and Snapshot Chapter 9
Bit Function:
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
X Test Trip
X Overload
X Phase Loss
X Ground Fault
X Stall
X Jam
X Underload
X Reserved
X Current Imbal
X Comm Fault
X Comm Idle
X NonVol Mem
X Hardware Fault
X Reserved
X Remote Trip
X Bocked Start
WarnHistory Mask
This parameter allows the user to
configure which current based
protection features are written to the five
record Warning History as outlined in the
table below:
1 = Recorded
0 = Not Recorded
Parameter Number 143
Access Rule Get/Set
Data Type UINT
Object Mapping 0Fhex-8F-01
Group TripWarn History
Units —
Minimum Value 0000000000000000
Maximum Value 0111111111111111
Default Value 0111011101101010
Bit Function:
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
X Reserved
X Overload
X Phase Loss
X Ground Fault
X Reserved
X Jam
X Underload
X Reserved
X Current Imbal
X Comm Fault
X Comm Idle
X Reserved
X Config Fault
X PM Starts
X PM Oper Hours
Reserved