Rockwell Automation 193-EC1_2_3_5, 193-ECPM,592-EC1_2_3_5 E3 and E3 Plus Solid-State Overload Relay User Manual - Manual (Page 209)

Rockwell Automation Publication 193-UM002I-EN-P - December 2011 209
Using DeviceLogix™ Chapter 11
7. Using the left mouse button, select the Bit Output block and drag it
to the right of the BOR function block. Double-click on the Bit Input
block to select Output A of the E3 Plus under the Hardware Boolean
Output set.
8. Place the cursor on the left of the Bit Output block and press the left
mouse button. Draw a line from the Bit Output block to the Out of the
BOR function block and double-click the left mouse button to establish a
connection.