Rockwell Automation 193-EC1_2_3_5, 193-ECPM,592-EC1_2_3_5 E3 and E3 Plus Solid-State Overload Relay User Manual - Manual (Page 253)

Rockwell Automation Publication 193-UM002I-EN-P - December 2011 253
DeviceNet™ Information Appendix B
143 Get/Set Jam Trip Level UINT 0…600 %FLA 250
144 Get/Set Jam Warn Level UINT 0…600 %FLA 150
145 Get/Set UL Inhibit Time USINT 0…250 seconds 10
146 Get/Set UL Trip Delay USINT 0.1…25.0 seconds 5.0
147 Get/Set UL Trip Level USINT 10…100 %FLA ➊ 50
148 Get/Set UL Warn Level USINT 10…100 %FLA ➊ 70
149 Get/Set CI Inhibit Time USINT 0…250 seconds 10
150 Get/Set CI Trip Delay USINT 0.1…25.0 seconds 5.0
151 Get/Set CI Trip Level USINT 10…100 %FLA 35
152 Get/Set CI Warn Level USINT 10…100 %FLA 20
153 ➍ Get/Set GF Trip Inhibit USINT
0 = Enabled
1 = Disabled
0
154 ➍ Get/Set 2-Spd Net Enable USINT
0 = Disabled
1 = Enabled
0
155 ➍ Get/Set 2-Spd FLA Set UINT
This attribute exists
only for current ranetgs
that report 1 or 2
decimal places
resolution
Current
Range
Dependent
156 ➍ Get/Set
2-Spd FLA Set
Times 10
UINT
This attribute exists
only for current ranetgs
that report 2 decimal
places resolution
Current
Range
Dependent
157 ➍ Get/Set
2-Spd FLA Set
Div 10
UINT
This attribute exists
only for current ranetgs
that report 0 decimal
place resolution
Current
Range
Dependent
178 Get/Set CT Ratio USINT 50:5…5000:5 50:5
180 Get/Set GF Warning Delay USINT 0.1 s
181 Get/Set
GF Ssensing
Range
UINT
0 = 20…100 mA
1 = 100…500 mA
2 = 0.2…1.0 mA
3 = 1.0…5.0 mA
The following attributes are used to support multiple current ranges.
190➋
224➌
Get/Set FLC Set Times 10 UINT
This attribute exists
only for current ranges
that report 2 decimal
place resolution
Current
Range
Dependent
191➋
225➌
Get/Set FLC Set Div 10 UINT
This attribute exists
only for current ranges
that report 0 decimal
place resolution
Current
Range
Dependent
192➋
226➌
Get
Avg Current
Times 10
UINT
This attribute exists
only for current ranges
that report 2 decimal
place resolution
Current
Range
Dependent
193➋
227➌
Get
L1 Current Times
10
UINT
This attribute exists
only for current ranges
that report 2 decimal
place resolution
Current
Range
Dependent
194➋
228➌
Get
L2 Current Times
10
UINT
This attribute exists
only for current ranges
that report 2 decimal
place resolution
Current
Range
Dependent
Table 120 - Overload Object Instance Attributes
Attribute
ID Access
Rule Name Data
Type Value Default