HP StorageWorks Scalable File Share - Manual (Page 35)

Booting the system 3–3
.
.
.
Command has finished:
south[3,5,7] --
*** Server States *** Success: south[3,5,7]
6. Boot the second server in each server pair by entering the command shown in the following example:
sfs> boot server south[4,6,8]
Command id 136
16:29:59 south4 --
.
.
.
16:30:02 south4 --
.
.
.
16:30:03 south4 -- Checking server status
16:30:14 south4 -- Powering on server
.
.
.
16:30:02 south6 --
.
.
.
16:30:03 south6 -- Checking server status
16:30:55 south6 -- Server power is on
.
.
.
16:30:02 south8 --
.
.
.
16:30:03 south8 -- Checking server status
16:30:55 south8 -- Server power is on
.
.
.
16:31:05 south4 -- Waiting for server to boot
.
.
.
16:33:10 south4 --
16:33:10 south4 -- Server is up, and configured
.
.
.
Command has finished:
south[4,6,8] --
*** Server States *** Success: south[4,6,8]
When all of the servers have booted, display the status of the servers by entering the following
command:
sfs> show server
Name State Power Services
---------- ------- ---------- --------
south1 running on admin
south2 running on mds1
south3 running on ost1 ost2
south4 running on ost3 ost4
.
.
.
7. If a file system is in the
stopped
state when the system boots, the file system MDS and OST services
are not automatically started. Start the file system as described in Section 3.8.