1 using the ib-setup utility, Using the ib-setup utility -17 – HP StorageWorks Scalable File Share User Manual
Page 241
Troubleshooting the Voltaire InfiniBand interconnect
9–17
ats 36416 1
devucm 13944 2
q_mng 18768 0 [sdp]
ibat 62572 5 [sockets ipoib-ud devucm]
cm_2 72416 0 [sdp devucm]
gsi 56392 6 [ipoib-ud ats ibat cm_2]
adaptor-tavor 136480 1
vverbs-base 49960 0 [sdp ipoib-ud ats devucm q_mng ibat cm_2 gsi
adaptor-tavor]
mlog 8628 0 [sockets sdp ipoib-ud ats devucm q_mng ibat cm_2 gsi
adaptor-tavor vverbs-base]
repository 77628 0 [sockets sdp ipoib-ud ats q_mng ibat cm_2 gsi
adaptor-tavor vverbs-base mlog]
hadump 1488 0 [gsi]
bmod_ib_mgt 75892 0 (unused)
mod_vapi 127456 0 [adaptor-tavor mod_ib_mgt]
mod_vipkl 203424 0 [mod_vapi]
mod_thh 260640 0 [mod_vapi]
mod_hh 16632 0 [mod_vipkl mod_thh]
mod_vapi_common 63880 0 [mod_ib_mgt mod_vapi mod_vipkl mod_thh]
mod_mpga 24960 0 [mod_vapi]
mosal 112276 0 [mod_ib_mgt mod_vapi mod_vipkl mod_thh mod_vapi_common
mod_mpga]
If the modules are not loaded, check your configuration and then try to restart the interconnect.
9.25.1.2 Starting, stopping, and auto-starting the Voltaire InfiniBand interconnect
You can start and stop the Voltaire InfiniBand interconnect software, and configure the software to start
automatically, in two ways, as follows:
•
Using the ib-setup utility (Section 9.25.1.2.1)
•
From the command line (Section 9.25.1.2.2)
9.25.1.2.1 Using the ib-setup utility
To start the
ib-setup
utility, enter the following command:
# ib-setup
A menu is displayed. Select the option you require, as follows:
•
To configure a server so that the interconnect software starts automatically when the server is booted,
select option
1
and type
yes
.
Note that this does not start the interconnect software.
•
To start the interconnect software, select option
5
.
•
To stop the interconnect software, select option
6
.
•
To exit the
ib-setup
utility, select option
8
.
The following is an example of the output when the Voltaire InfiniBand interconnect software is started
correctly:
====== Voltaire HCA400 InfiniBand Stack Setup ======
Version: ibhost-v3.0.0_16: Tue Mar 15 08:29:40 CET 2005 on hptc174.
System: kernel version: 2.4.21+sfs, memory 3572MB.
Hostname: node-39.
IB configuration: AutoStart: on, SM: VFM.
HCA400 Firmware version: 0x300000000.
HCA400 PCI Type: PCI-X
HCA Ports status: 1 - PORT_ACTIVE, 2 - PORT_DOWN
IPoIB (config) IPoIB (active)
ip-addr: 12.0.0.39 12.0.0.39
netmask: 255.255.0.0 255.255.0.0
broadcast: 12.0.255.255 12.0.255.255
mtu: 1500 1500