HP StorageWorks Scalable File Share - Manual (Page 298)

CLI commands A–4
A.5 configure commands
A.5.1 configure array
The
configure array
command configures an SFS20 array. This command cannot be used to configure
an EVA4000 array.
Syntax
configure array array_numbers [adm_lun=yes|no] [adm_lun_size=size]
[service_lun=yes|no]
[luns_size=size|size%[,size|size%,...][all]] [raid=ADG|6|5|1+0|1|0]
[stripe_size=8|16|32|64|128|256] [sectors=32|63] [disks_per_group=num_disks]
[spare_disk_count=num_disks] [force=yes|no] [preferred_server=server_name]
[rebuild_priority=low|medium|high] [surface_scan_delay=delay_period]
Arguments
array_numbers
Required. Specify the array numbers of the arrays you want to configure.
You can specify a single array, a comma-separated list of arrays, or a
range of arrays.
adm_lun
Optional. Specify whether the array is to contain an administration LUN.
By default, the
configure array
command automatically creates the
administration LUN for the system on the lowest numbered array attached
to the administration and MDS server pair. A spare administration LUN is
created on every other array attached to the administration and MDS
server pair.
If you do not want an administration LUN or a spare administration LUN to
be configured on the array, specify
no
in this argument. However, there
must be one administration LUN for the system.
adm_lun_size O
ptional.
S
pecify the size of the administration LUN (and the spare
administration LUN). The size must be specified in GB, and the default
value is
40
.
Do not use this argument for arrays connected to Object Storage Servers.
service_lun
Optional. Specify whether the array is to contain a service LUN.
By default, the
configure array
command automatically creates the
service LUN for a server pair on the lowest numbered array attached to a
server pair. A spare service LUN is created on every other array attached
to the server pair.
If you do not want a service LUN or a spare service LUN to be configured
on the array, specify
no
in this argument. However, there must be one
service LUN for each server pair.
luns_size
Optional. Specify, in a comma-separated list, the size of each LUN that is
to be created in the disk group (in addition to the administration LUN (one
for the entire system), spare administration LUN, service LUN or spare
service LUN, where these are automatically created in the disk group).
Sizes can be specified in GB or as percentages, or you can specify
all
to
indicate that the LUN is to occupy all of the (remaining) space in the disk
group. If the
all
option is used, it must be the last entry in the list of LUNs.
If you do not specify any LUN sizes, one LUN that uses all of the available
space in the disk group is created.