HP StorageWorks Scalable File Share User Manual
Page 154
Verifying, diagnosing, and maintaining the system
6–24
2.
Run the
gm_board_info
program, by entering the following command:
# /opt/gm/bin/gm_board_info
3.
If the
gm_board_info
program returns a message similar to the following, this indicates that the
Myrinet adapter was not found:
*** No boards found or all ports busy ***
Look to see if the board is physically present.
If the board is physically present, enter the following commands and then examine the log output to
see whether there were any software issues when the server booted:
# sfsmgr
.
.
.
sfs> show log
4.
Look at the status of the LEDs. In normal operation, there is a green LED and a flashing yellow/amber
LED illuminated on the Myrinet adapter, and a green LED illuminated on each of the corresponding
switch ports. If this is not the case, examine the switch line card to see if it is powered on and look at
the cable to see if it is seated correctly. To test the cable, swap it with a cable that is known to be
working properly.
5.
Examine the output from the
gm_board_info
program to determine whether other hosts can be
seen on the network. When the network is operating correctly, each server in the HP SFS system has
a route to every other server in the system, and a route to each client node.
The following example shows typical output from the
gm_board_info
program:
# /opt/gm/bin/gm_board_info
GM build ID is "2.0.11_Linux_rc20040331144228PST
@hpls-ia32-bld.my.domain.com:
/build/nightly.jimi/builds/ia32_jimi_sm/output/build/gm-2.0.11_Linux
Tue Jun 29 01:03:07 IST 2004."
Board number 0:
lanai_cpu_version = 0x0a00 (LANai10.0)
lanai_sram_size = 0x001fe000 (2040K bytes)
ROM settings:
MAC=00:60:dd:49:92:7e
SN=148492
PC=M3F-PCIXD-2
PN=09-0
LANai time is 0x813362beca ticks, or about 4134 minutes since reset.
Mapper is 00:60:dd:49:92:d1.
Map version is 1979478.
6 hosts.
Network is fully configured.
This node is "south2"
Board has room for 16 ports, 1600 nodes/routes, 16384 cache entries
Port token cnt: send=61, recv=254
Port: Status PID
0: BUSY 17069 (this process [gm_board_info])
1: BUSY 724
3: BUSY -1
Route table for this node follows:
gmID MAC Address gmName Route
---- ----------------- ----------------------------- --------------
1 00:60:dd:49:8c:9a south3 (this node)
2 00:60:dd:7e:d9:20 south1.my.domain.com 81