HP StorageWorks Scalable File Share - Manual (Page 221)

Adding and removing components 8–23
At any stage you can enter ? to get more help on the topic.
To update data select one or all of the following sections:
1) System
2) Configure Networks
3) Network Services
4) Management Network
5) iLO Access
6) Storage
a) All of the above
e) Exit (save updates)
q) Quit (discard updates)
Enter your choice [a]: 1
System ----------------------------------------------------------------------
This section specifies the name of the system and the number of
servers currently present.
1) System name south
2) DNS domainname my.domain.com
3) Number of servers 6
4) Number of the Admin (first) server 1
5) Timezone EST5EDT
a) All of the above
n) Next Section
c) Cancel
Enter your choice [a]: 3
This is the number of servers present and ready to be configured, including
the administration server, the MDS server and all Object Storage Servers.
There must be at least two servers in the system.
Enter the number of servers in the system [4]: 4
The System configuration is
System name south
DNS domainname my.domain.com
Number of servers 4
Number of the Admin (first) server 1
Timezone EST5EDT
Is this correct? [yes]: y
This menu allows you to specify or update configuration data. If
you are not happy with any of the data you have entered, you may
reenter it again. Your changes do not take affect until you exit.
If you choose to quit, all changes you have made are discarded.
At any stage you can enter ? to get more help on the topic.
To update data select one or all of the following sections:
1) System
2) Configure Networks
3) Network Services
4) Management Network
5) iLO Access
6) Storage
a) All of the above
e) Exit (save updates)
q) Quit (discard updates)
Enter your choice [a]: e
Saving updates
Removing south5
Removing south6
sfs>