HP StorageWorks Scalable File Share - Manual (Page 198)

Changing the system parameters 7–16
4. Turn on the power to the administration server, by entering the command shown in the following
example:
sfs> boot server south1
5. Log in to the administration server, then shut down the MDS server by entering the command shown in
the following example (where
south2
is the MDS server):
sfs> shutdown server south2
6. Turn on the power to the MDS server, by entering the command shown in the following example:
sfs> boot server south2
The system will now be using the new iLO user name and password. If you wish, you can delete the old iLO
user from each server (using either the Integrated Lights-Out Setup Utility or the Web interface on the iLO
component).