HP StorageWorks Scalable File Share - Manual (Page 225)

9–1
9 Troubleshooting
This chapter provides information for troubleshooting possible problems in the HP SFS system. (For
information on troubleshooting problems on client nodes, refer to the HP StorageWorks Scalable File Share
Client Installation and User Guide.) The topics covered in this chapter include the following:
• Server fails to boot during installation (Section 9.1)
• Server fails to boot (Section 9.2)
• Server stops responding (Section 9.3)
• Server fails to mount administration LUN — EXT3-fs error (Section 9.4)
• Benign message displayed by the configure system command (Section 9.5)
• The configure server command fails because static routes are incorrectly configured (Section 9.6)
• Server with Quadrics interconnect may fail to boot (Section 9.7)
• The scan mac command fails (Section 9.8)
• Setting Lustre debug level (Section 9.9)
• System database has become corrupted (Section 9.10)
• Service LUN has become corrupted (Section 9.11)
• Replacing a service LUN with a spare service LUN (Section 9.12)
• Booting a server in single-user mode (Section 9.13)
• The SFS CLI reports that the database is not ready (Section 9.14)
• The configure array command fails (Section 9.15)
• Command remains in the Allocated state (Section 9.16)
• The configure server command remains in the Unallocated state (Section 9.17)
• Emergency clustat events occur during configure server command (Section 9.18)
• The show log command fails with corrupted record (Section 9.19)
• SFS CLI command fails with error: Could not insert duplicate record (Section 9.20)
• Press "F1" key to continue prompt (Section 9.21)
• Gigabit Ethernet -113 error code (Section 9.22)
• Troubleshooting the Quadrics interconnect (Section 9.23)
• Troubleshooting the Myrinet interconnect (Section 9.24)
• Troubleshooting the Voltaire InfiniBand interconnect (Section 9.25)
• Troubleshooting file systems (Section 9.26)
• Troubleshooting file system performance (Section 9.27)
• Troubleshooting EVA4000 array connectivity (Section 9.28)
• Troubleshooting LUN presentation (Section 9.29)
• Accessing consoles (Section 9.30)