Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 997)

Fabric OS Message Reference 975
53-1003140-01
ZONE-1059
5
ZONE-1059
Message
Unexpected TI routing behavior or a potentially unroutable TI configuration has
been detected on local domain
error was detected>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the current fabric topology and TI zone configuration may result in an unroutable condition
or an unexpected routing behavior.
Recommended
Action
Execute the zone --showTIerrors command on the specified switch to report the conflicting
configuration details.
ZONE-1060
Message
Non-TI and TI failover-enabled traffic restricted to domain due to TI
failover-disabled zoning.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that only TI failover-disabled paths remain to reach the specified domain causing non-TI and TI
failover traffic disruption.
Recommended
Action
Add or restore the non-TI or TI failover-enabled inter-switch links (ISLs) to the specified domain.
ZONE-1061
Message
Some trunk members are missing from failover disabled active TI zones.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that some members in the trunk group are not added to the failover-disabled TI zone. This will
result in traffic disruption if the trunk member goes down.
Recommended
Action
If any trunk member is included in the TI failover-disabled zone path, then always add all members from
that group. Execute the zone --showTItrunkerrors command on the switch to find the missing trunk
members in the TI zone.