Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 463)

Fabric OS Message Reference 441
53-1003140-01
FICN-1091
5
FICN-1091
Message
DevTeraEgr:FICON Selective Reset:Path=0x
DeviceDomain> Elapsed Time=
time in seconds for the device>.
device> seconds.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel issued a Selective Reset sequence for a device.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer support
for assistance.
FICN-1092
Message
DevTeraEgr:FICON Purge received Path=0x
DeviceDomain>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel issued a Purge Path command sequence for a device.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1093
Message
DevTeraIng:Auto Sense Data received on Path=0x
DeviceDomain> Bytes0-0xB=0x
data from the device>
sense data from the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON tera write pipelining processed sense data from a FICON device.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.