Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 456)

434 Fabric OS Message Reference
53-1003140-01
FICN-1072
5
FICN-1072
Message
DevTapeEgr:Tape Loaded on Path=0x
DeviceDomain>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the tape I/Os are processed from a locally connected Logical Partition (LPAR), which indicates
that a tape is loaded on a device.
Recommended
Action
No action is required.
FICN-1073
Message
HostTapeIngr:Unloaded:Path=0x
DeviceDomain>:states=0x<4 prior emulation
states>:cmds=0x
commands received from the channel for this device>:status=0x
sent to the channel for this device>:flags=0x
Loaded,0x40-WriteEmul,0x20-RdBlkEmul,0x10-RdCpEmul)>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a Rewind and Unload I/O has been processed from a locally connected Logical Partition
(LPAR), which indicates that a tape should be unloaded on a device.
Recommended
Action
No action is required.
FICN-1074
Message
HostTapeIngr:WriteReport:Path=0x
DeviceDomain>:Emuls=0x
state to non-idle state transitions while this tape was loaded>:Cmds=0x
of emulated host write commands processed while this tape was
loaded>:Chains=0x
loaded>:MBytes=
was loaded>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a Rewind and Unload I/O has been processed from a locally connected Logical Partition
(LPAR) and Tape Write Pipelining was performed on the currently loaded tape.