Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 241)

Fabric OS Message Reference 219
53-1003140-01
C3-1021
5
C3-1021
Message
S,P(): Port is offline due to
Encryption Compression Block error.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware
that may degrade the data traffic.
Recommended
Action
When this error occurs, the software will automatically recover from the error and no action is required.
However, if the problem persists, replace the blade.
C3-1023
Message
Single RDY/Frame Loss detected and recovered on Slot ,Port
number>() rdy(0x)/frame(0x).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that above-normal errors are observed in hardware that may or may not impact the data traffic.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
C3-1025
Message
S,P(): Extra credit on
F_port:ftx= curr_cred= actual_cred=.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames.
Recommended
Action
When this error is observed persistently, replace the device.