Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 819)

Fabric OS Message Reference 797
53-1003140-01
SEC-1195
5
SEC-1195
Message
This switch has no license.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
SEC-1196
Message
Switch does not have all default account names.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the default switch accounts admin and user do not exist on the switch when enabling security.
Recommended
Action
Reset the default admin and user account names on the switch that reported the warning and retry
enabling security.
SEC-1197
Message
Changed account .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the specified account has changed.
Recommended
Action
No action is required.