Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 336)

314 Fabric OS Message Reference
53-1003140-01
EM-1064
5
EM-1064
Message
Blade: is being powered off (based on user configuration) upon receiving
a HW ASIC ERROR, reason:.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that the blade is being powered off because a hardware (HW) application-specific integrated
circuit (ASIC) error was detected, and you have selected to power off the problem blade when such a
condition occurred.
Recommended
Action
Contact your switch service provider for assistance.
EM-1065
Message
SAS Virtualization Services are not available due to incompatibility between the
FOS and SAS versions.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the version of the control processor firmware (CFOS) or the blade processor firmware
(BFOS) is not compatible with the Storage Application Services (SAS) or other application firmware
versions.
Recommended
Action
Upgrade the Fabric OS firmware or the SAS firmware by using the firmwareDownload command. Refer
to the release notes for a compatible version of firmware.
EM-1066
Message
SAS Virtualization Services are now available
board systems>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the previously incompatible Fabric OS or Storage Application Services (SAS) firmware has
been upgraded and is now compatible.
Recommended
Action
No action is required.