Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 614)

592 Fabric OS Message Reference
53-1003140-01
HIL-1104
5
HIL-1104
Message
Blower faulted, () is below
threshold.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the fan voltage is below threshold.
Recommended
Action
Run the psShow command to verify the power supply status.
Try to reseat the faulty fan field-replaceable units (FRUs) and power supply FRU to verify that they are
seated properly.
If the problem persists, replace the fan FRU or the power supply FRU as necessary.
HIL-1105
Message
Switch error, () above threshold.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the switch voltage is above threshold. This message is specific to non-bladed switches.
Recommended
Action
For switches that do not have field-replaceable units (FRUs), replace the entire switch.
If the 12 volt level is faulty, replace one or both power supplies; if any other voltage is faulty, replace the
entire switch.
HIL-1106
Message
Switch error, () below threshold.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the switch voltage is below threshold. This message is specific to non-bladed switches.
Recommended
Action
For switches that do not have field-replaceable units (FRUs), replace the entire switch.
If the 12 volt level is faulty, replace one or both power supplies; if any other voltage is faulty, replace the
entire switch.