Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 458)

436 Fabric OS Message Reference
53-1003140-01
FICN-1077
5
FICN-1077
Message
DevTapeEgr:Unloaded:Path=0x
DeviceDomain>:states=0x<4 prior emulation
states>:cmds=0x
commands received from the channel for this device>:status=0x
received from the channel for this device>:flags=0x
(0x80-Tape Loaded,0x40-WriteEmul,0x20-RdBlkEmul,0x10-RdCpEmul)>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a Rewind and Unload I/O has been processed from a remotely connected Logical Partition
(LPAR), which indicates that a tape should be unloaded on a device.
Recommended
Action
No action is required.
FICN-1078
Message
DevTapeEgr:WriteReport:Path=0x
DeviceDomain>:Emuls=0x
state to non-idle state transitions while this tape was loaded>:Cmds=0x
of emulated host write commands processed while this tape was
loaded>:Chains=0x
loaded>:MBytes=
was loaded>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a Rewind and Unload I/O has been processed from a remotely connected Logical Partition
(LPAR) and Write Tape Pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.