Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 723)

Fabric OS Message Reference 701
53-1003140-01
PDM-1004
5
PDM-1004
Message
PDM memory shortage.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) process ran out of memory.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1005
Message
FSS register failed.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) failed to register with the Fabric OS synchronization
service (FSS).
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1006
Message
Too many files in sync.conf.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the sync.conf configuration file contains too many entries.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.