Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 815)

Fabric OS Message Reference 793
53-1003140-01
SEC-1183
5
Recommended
Action
No action is required.
SEC-1183
Message
Policy to binary conversion error: Port is out range.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a security database conversion has failed because of an invalid value.
Recommended
Action
Retry the command with a valid value.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
SEC-1184
Message
configuration change, action ,
server ID .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the specified action is applied to the specified remote authentication dial-in user service
(RADIUS/LDAP/TACACS+) server configuration. The possible actions are ADD, REMOVE, CHANGE,
and MOVE.
Recommended
Action
No action is required.
SEC-1185
Message
switch DB.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the switch database was enabled or disabled as the secondary authentication, authorization,
and accounting (AAA) mechanism when remote authentication dial-in user service
(RADIUS/LDAP/TACACS+) is the primary AAA mechanism.
Recommended
Action
No action is required.