Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 537)

Fabric OS Message Reference 515
53-1003140-01
FW-1197
5
FW-1197
Message
, is below low boundary(High=, Low=).
Current value is .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of link resets that the port experiences has fallen below the low boundary level.
Link resets occur due to link timeout errors that indicate no frame activity. A low number of link resets
means that the switch is functioning normally.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation.
FW-1198
Message
, is above high boundary(High=, Low=).
Current value is .
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of link resets that the port experiences has increased above the high boundary
level. Link resets occur due to link timeout errors that indicate no frame activity. Both physical and
hardware problems can cause link resets to increase.
Recommended
Action
Check both ends of your cable connection. Verify if the cable and small form-factor pluggables (SFPs)
are faulty.
FW-1199
Message
, is between high and low boundaries(High=,
Low=). Current value is .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of link resets that the port experiences has changed from a value beyond the
acceptable range to a value within the acceptable range. Link resets occur due to link timeout errors that
indicate no frame activity. Both physical and hardware problems can cause link resets to increase.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation.