Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 441)

Fabric OS Message Reference 419
53-1003140-01
FICN-1027
5
FICN-1027
Message
DevTapeIng:Device level exception found for Path=0x
HostPort DeviceDomain>: Oxid=0x
the frame that included the Device Level Exception>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active emulation device delivered a Device Level Exception frame to the emulation
processing.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1028
Message
HostDiskIng:FICON Cancel received Path=0x
DeviceDomain> state=0x
state of the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an active emulation device received a cancel operation from the FICON channel.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1029
Message
HostDiskIng:FICON Selective Reset:Path=0x
DeviceDomain> state=0x
state of the device> LastCmds=0x
this device> LastStatus=0x
this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active disk emulation device received a Selective Reset from the FICON channel.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.