Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 178)

156 Fabric OS Message Reference
53-1003140-01
AUTH-1004
5
AUTH-1004
Message
Failed to set type to .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the authUtil command has failed to set the authentication configuration value. The data
type can be authentication type, DH group type, hash type, or policy type.
Recommended
Action
Execute the authUtil command again.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1005
Message
Authentication file does not exist: .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an authentication file corruption.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1006
Message
Failed to open authentication configuration file.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.