Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 162)

140 Fabric OS Message Reference
53-1003140-01
AG-1027
5
AG-1027
Message
Unable to handle this login request on port because NPIV capability
is not enabled on this port.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that N_Port ID virtualization (NPIV) is not enabled on the specified port.
Recommended
Action
Execute the portCfgNpivPort command on the Access Gateway switch to enable the NPIV capability on
the port.
AG-1028
Message
Device with Port WWN tried to perform fabric login through port
, without having access permission.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the device does not have login access for the specified port as per Advanced Device
Security (ADS) policy set by the user.
Recommended
Action
Add the device to the ADS allow list for the specified port using the ag --adsadd command.
AG-1029
Message
Port Group (ID: ) has ports going to different fabrics.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a misconfiguration.
Recommended
Action
Connect all ports in the port group to the same fabric.