Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 820)

798 Fabric OS Message Reference
53-1003140-01
SEC-1198
5
SEC-1198
Message
Security violation: Unauthorized host with IP address tries to
establish API connection.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates an API security violation was reported. The specified unauthorized host attempted to establish
an API connection.
Recommended
Action
Check to see if the host IP address specified in the message can be used to manage the fabric through
an API connection. If so, add the host IP address to the API policy of the fabric. If the host is not allowed
access to the fabric, this is a valid violation message and an unauthorized entity is trying to access your
fabric. Take appropriate action, as defined by your enterprise security policy.
SEC-1199
Message
Security violation: Unauthorized access to serial port of switch
instance>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a serial connection policy security violation was reported. An attempt was made to access the
serial console on the specified switch instance when it is disabled.
Recommended
Action
Check to see if an authorized access attempt is being made on the console. If so, add the switch WWN
to the serial policy. If the host is not allowed access to the fabric, this is a valid violation message and an
unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your enterprise
security policy.
SEC-1200
Message
Security violation: MS command is forwarded from non-primary FCS switch.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a management server (MS) forward security violation was reported. A management server
command was forwarded from a non-primary fabric configuration server (FCS) switch.
Recommended
Action
Check the MS policy and verify that the connection is allowed. If the connection is allowed but not
specified, enable the connection in the MS policy. If the MS policy does not allow the connection, this is a
valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate
action, as defined by your enterprise security policy.