Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 547)

Fabric OS Message Reference 525
53-1003140-01
FW-1273
5
FW-1273
Message
, is below low boundary(High=, Low=). Current value
is .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of frame types or commands that the port receives has fallen below the low
boundary. The port has received a Small Computer System Interface (SCSI) Read, SCSI Write, SCSI
Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1274
Message
, is above high boundary(High=, Low=). Current
value is .
Message Type
AUDIT | LOG
Class
FW
Severity
INFO
Probable Cause
Indicates that the number of frame types or commands that the port receives has risen above the high
boundary. The port has received a Small Computer System Interface (SCSI) Read, SCSI Write, SCSI
Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1275
Message
, is between high and low boundaries(High=, Low=).
Current value is .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of frame types or commands that the port receives has changed from a value
outside of the acceptable range to a value within the acceptable range. The port has received a Small
Computer System Interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP
commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.