Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 216)

194 Fabric OS Message Reference
53-1003140-01
BL-1053
5
BL-1053
Message
Invalid E_Port credits configured for slot , port
number>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that invalid E_Port credits are configured. The old credit model will be retained.
Recommended
Action
Disable the E_Port credits using the portcfgeportcredits --disable command.
BL-1054
Message
QSFP (SN: ) is not supported on blade in slot
blade that has the QSFP> with ID
not support it>. Check for compatibility of QSFP with this core or port blade.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the current quad small form-factor pluggable (QSFP) is not supported by this particular
type of blade (core or port), but it can be inserted in other blades. Core blades and port blades have their
own supported versions of QSFPs.
Recommended
Action
Replace QSFP that is compatible with the blade.
BL-1055
Message
The octet mode of user port () in slot:
the QSFP>, blade ID
is not supported.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that quad small form-factor pluggables (QSFPs) supports only the octet combo 1. If the port is
configured in the other 2 modes (2 and 3), there is a mismatch in capabilities.
Recommended
Action
Set the correct octet combo by using the portCfgOctetSpeedCombo command.