Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 972)

950 Fabric OS Message Reference
53-1003140-01
XTUN-1998
5
XTUN-1998
Message
FTRACE buffer has been cleared.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a CLI command or supportSave operation freed the trace buffer back into the FTRACE
free pool.
Recommended
Action
No action is required.
XTUN-1999
Message
FTRACE buffer has been triggered.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a programmed trigger event has been detected.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer support
for assistance.
XTUN-2000
Message
FCIP Tunnel UP.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified Fibre Channel over IP (FCIP) tunnel is up.
Recommended
Action
No action is required.
XTUN-2001
Message
FCIP Tunnel DOWN ().
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified Fibre Channel over IP (FCIP) tunnel has gone down.