Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 994)

972 Fabric OS Message Reference
53-1003140-01
ZONE-1042
5
ZONE-1042
Message
The effective configuration has been disabled.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the effective zone configuration has been disabled.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
ZONE-1043
Message
The Default Zone access mode is set to No Access.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the Default Zone access mode is set to No Access.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
ZONE-1044
Message
The Default Zone access mode is set to All Access.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the Default Zone access mode is set to All Access.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
ZONE-1045
Message
The Default Zone access mode is already set to No Access.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the Default Zone access mode is already set to No Access.