Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 821)

Fabric OS Message Reference 799
53-1003140-01
SEC-1201
5
SEC-1201
Message
Security violation: MS device operates on non-primary FCS switch.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a management server (MS) operation security violation was reported. An MS device operation
occurred on a non-primary fabric configuration server (FCS) switch.
Recommended
Action
Check the management server policy and verify the connection is allowed. If the connection is allowed
but not specified, enable the connection in the MS policy. If the MS policy does not allow the connection,
this is a valid violation message and an unauthorized entity is trying to access your fabric. Take
appropriate action, as defined by your enterprise security policy.
SEC-1202
Message
Security violation: Unauthorized access from MS device node name
name>, device port name .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a management server (MS) security violation was reported. The unauthorized device specified
in the message attempted to establish a connection.
Recommended
Action
Check the MS server policy and verify that the connection is allowed. If the connection is allowed but not
specified, enable the connection in the MS policy. If the MS policy does not allow the connection, this is a
valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate
action, as defined by your enterprise security policy.
SEC-1203
Message
Login information: Login successful via TELNET/SSH/RSH. IP Addr:
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the IP address of the remote station logging in.
Recommended
Action
No action is required.