Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 225)

Fabric OS Message Reference 203
53-1003140-01
BM-1055
5
BM-1055
Message
Firmwaredownload timed-out for AP. Faulting switch.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that firmware download on the application processor (AP) blade has failed.
Recommended
Action
Execute the slotPowerOff and slotPowerOn commands or reseat the affected blade.
BM-1056
Message
AP is not configured. Persistently disabling all ports on the switch.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the policy of the specified switch is to persistently disable all ports the first time the AP is
detected. This may be caused by one of the following reasons:
• The AP was detected for the first time on this switch.
• The switch was configured under a different mode.
Recommended
Action
Configure the switch to persistently enable all ports.
BM-1058
Message
Download of AP firmware failed for the switch. Reissue firmwaredownload to
recover.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the automatic firmware upgrade on the application processor (AP) failed because the
firmware version running on the AP was detected to be different from the system firmware.
Recommended
Action
Execute the firmwareDownload command to recover the AP.