Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 545)

Fabric OS Message Reference 523
53-1003140-01
FW-1247
5
FW-1247
Message
, is between high and low boundaries(High=, Low=).
Current value is .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of end-to-end word frames that the switch receives has changed from a value
outside of the acceptable range to a value within the acceptable range. Receive performance messages
appear due to the number of word frames that travel from the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1248
Message
, value has changed(High=, Low=). Current value is
.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of end-to-end word frames that the switch transmits has changed. Transmit
performance messages appear due to the number of word frames that travel from the configured S_ID to
the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1249
Message
, is below low boundary(High=, Low=). Current value
is .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of end-to-end word frames that the switch transmits has fallen below the low
boundary. Transmit performance messages appear due to the number of word frames that travel from
the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.